AquaVortexer Biocycles 1L or 1.8L with zome cap and its 6-sided Lemurian quartz

This new AquaVortexer, with a levorotary direction of rotation as standard, is housed in a new translucent semi-crystalline polymer casing with a zonohedral shape and 24 helices with 8 lozenges per turn.

Base height 52mm, width 160mm.

The vortex-generating motor system contains :

• 4 cardinal quartz crystals + ferromagnetic magnets.
• 3 metatronic seals (2 fixed + 1 rotating).
• 1 Clifford torus-shaped flux diffusion seal in 18-carat gold-plated brass.
• 1 24-LED RGB ring containing 6 chromo Biocycles programmes (slow rotation + poly-frequency cycles).
• 1 Rotary knob on front panel to adjust vortex rotation speed.
• 1 Pushbutton at the rear to select the broadcast colours.
• 1 DC 5V power connector via 5.1/2.1mm jack adaptable to USB connection.

The system is supplied with :

• 1 x 5V DC power supply with cables + extension lead. Can work with any 5V 1A USB power supply. The system requires a 5V DC power supply of at least 1 Amp (5W) to operate.
• 1 Flacon Goutte d'eau 1.8Litres + fleur de vie or 1 Flacon Ypsilon conique 1 Litre.
• 1 Zome13 semi-crystalline translucent polymer stopper with 6-sided Lemurian quartz.
• 2 magnetic stirrers.

The chromatic diffusion system contains 6 Biocycles programmes selectable via a small button
push-button on the back of the case.
On power-up, the system starts up with the Blue Cycle programme.

The 6 integrated Biocycles programmes:

• P1 > Red/orange/gold range cycles
• P2 > Green range cycles
• P3 > Blue beach cycles
• P4 > Purple/magenta/pink range cycles
• P5 > White iridescent polychrome cycles
• P6 > Cycles arc en ciel

Direction of rotation :

As standard, the device is set to levorotary rotation (turns to the left, in the direction of transmutation).
On request, it can be set to dextrorotary (turns right in the harmonisation direction) or with the direction switch option, which adds a button on the back of the casing to change the direction of rotation after the vortex has stopped.
The system comes ready to use to enhance your water and much more besides, because it's also a scalar hologram generator with a pleasant, dreamlike chromatic diffraction effect (to harmonise your living space).

Using the AquaVortexer AVW24C: 1L or 1.8L carafe

The Aquavortexer generator contains a synergistic combination of several energising elements:
magnetic flux, mechanical action, crystalline flux, photonic flux and the action of waves of symbolic forms.

Installation and assembly of the AquaVortexer system :

Place the generator box on a flat surface of your choice and connect the 5V power supply to the back of the box.
Use an extension lead if necessary, depending on the distance from your EDF sockets (230V). Place the system in your kitchen (or any place you like) as far away as possible from other sources of electromagnetic power (oven, kettle, hob) (more than one metre).
Once plugged in, the box will light up on programme 3, blue cycle. It's ready!

After cleaning the bottle with cold water, slide in one of the magnetic stirrers supplied (small white food-grade PFTE tip). Fill the bottle ideally with filtered water or tap water. Don't fill the bottle completely - the life flower is a good level indicator (don't go over it).
Then place the bottle in the centre of the vortexer box.
The magnetic stirrer should centre itself automatically by the flow of the casing.
Place the Zome cap on the bottle.
Gently turn the rotary knob on the front panel to start producing the vortex.
Gradually adjust the speed of the vortex.
Start at step 2, then as the vortex forms in the bottle, you can increase the speed to step 4, then 6...
Practise stabilising the production of the vortex, admire its animation and dynamic effects... discover its possibilities... the sensory experience will show you the right settings as you use it and your observations.
Use the push-button on the back of the case to select the colour cycle that suits you or your needs, according to the colour symbolism.
Double-clicking the push-button deactivates colour diffusion.
Clicking will restart colour diffusion from programme 1 (red/gold range).

For the Dual Sens model, the switch for changing the direction of rotation is at the rear.

Do not change direction on the fly at full speed, as this will damage the motor!
Wait for it to stop, just like when you use water, then stop (slow down) and restart the vortex.

Agara Council

Read our article " STRUCTURED WATER, VIVIFIED WATER, a source of vital energy for all our needs "To understand the issues behind the need to drink filtered, energised and structured water...