GCS YShield screw-on earthing plate for anti-wave fabrics and cloths

The GCS YShield screw-on earthing plate is specially designed to ensure good earthing of low- and high-frequency protective curtains, fabrics and canopies, as well as MCL and MCF5 magnetic field shielding material.

The two earthing plates are held together by a screw. The material to be earthed must therefore be drilled (a small hole must be made in it for the screw to pass through).
The advantage is that the plate is impossible to detach inadvertently, so your fabric is always correctly earthed.

Scope of delivery

2 connection plates 36 x 36 x 6 mm, all necessary screws, washers, cable lugs and a screwing tool with Torx® bits

This plate is sold on its own! We recommend that you purchase a GL series ready-to-use earthing cable (available in 5 different lengths) + a GPE earthing plug at the same time.

Connectivity

A cable connection

Installation

1. Screw on the cable (lug) using the M4x3.2 screws and the tension washer.

2. Unscrew the 2 plates and separate them.

3. Drill a small hole in the material to be earthed using a pair of scissors or a small sharp knife. Be careful not to hurt yourself!

4. Screw the two plates firmly back together.

Technical specifications

Contents: screw-on earthing plate with accessories 

Weight: 130 g

Packaging dimensions: 150 x 120 x 30 mm

Made in Germany  

We accept no liability for damage to persons, animals or objects caused by improper use of this product, in particular earthing and electrical installation that does not comply with DIN 57100 / VDE 0100 standards. We recommend that the electrical installation and earthing of YShield® products be checked by a specialist electrician.