HNV100 YShield microwave shield - High and low frequencies - 1 or 2 person bed

The HNV100 anti-wave fabric underlay protects you from high-frequency radiation (mobile telephony), 5G(e.g. DECT cordless phones, WiFi, Wimax, Bluetooth, radar, etc.) and low frequencies (electrical fields associated with domestic installations) when it is earthed.

It is ideal for complementing the protection offered by anti-wave canopies, but can also be used on its own, under a bed or desk, to protect against radiation from the floor or the neighbour below.

It represents the best possible quality/protection/price ratio for this type of item, and offers 100 dB attenuation at 1 GHz over a very wide frequency band.

As it is not washable, we advise you to cover it with a carpet or floor covering of your choice to preserve its lifespan.

2 versions

• For single bed | 175 x 250 cm
  Consists of 2 strips of HNV100 YShield fabric, 90 cm wide and 250 cm long, to be overlapped by 5 cm, for a total width of 175 cm.
• For double bed | 250 x 250 cm
  Consists of 3 strips of HNV100 YShield fabric, 90 cm wide and 250 cm long, to be overlapped by 5 cm, for a total width of 260 cm.

Earthing

HNV100 is a highly conductive fabric that can be earthed, so it also provides protection against low-frequency electric fields.

To do this, use :

• a GCM magnetic earthing plate or a GCS screw-on earthing plate
• a GL earthing cable (5 different lengths: 20 cm, 1 metre, 2 metres, 5 metres and 10 metres, depending on the distance to an earthed wall socket),
• a GP1 permanent shield earthing plug for connection to a wall socket or a GCR earthing rod for connection outdoors, directly into the ground.

Please note! Earthing accessories are not included in the price of the carpet! They should be purchased separately.

Technical specifications

• Attenuation: 103 dB at 1 GHz for one layer
• Shielding attenuation is regularly validated and verified in the YShield EMC laboratory, according to the following measurement configurations and standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698 / A698M-07.
• Composition: nylon, copper, nickel
• Weight: 70 g / m²
• Colour: grey 
• Thickness: 0.16 mm
• Tensile strength: very good in both directions, 50 N/mm
• Do not wash
• Do not use outdoors
• Surface conductivity: 0.01 ohm (square resistance)

Made in China 

As canvases are cut to order, they cannot be returned or exchanged.

We accept no liability for damage to people, animals or objects caused by incorrect use of anti-wave cloths and fabrics, in particular earthing and electrical installation that does not comply with DIN 57100 / VDE 0100 standards. We recommend that the electrical installation and earthing of YShield® fabrics be checked by a specialist electrician.

Please consult