Polier PROSTOP65 PLC filter CENELEC A (Linky), B, C and D

The Polier PROSTOP65 PLC filter is a high-performance broadband PLC filter that prevents any PLC current in the various CENELEC bands (CENELEC A Linky, B, C and D) from passing through your electrical panel and propagating through your home's electrical network.

The filter principle

• The LINKY electricity meter and domestic equipment (home automation, alarms, security systems) emit PLC (Power Line Communication) signals through the electricity network. These parasitic signals present on the electrical network are disturbing for electrosensitive people.
• These waves can come from your own LINKY electricity meter, or from your neighbour's meter or equipment. They are sent throughout the electricity network.
• With 35 years' experience in the field of energy management, POLIER offers the PROSTOP high-performance PLC filter, which filters the waves from Linky electricity meters as well as all domestic equipment.
• The PROSTOP filter is connected between the subscriber's circuit breaker and the electrical panel. It is therefore installed on the private part of the installation and blocks waves from entering the home.
• The connection must be carried out by a professional.

The benefits of this filter

• The PROSTOP65 Polier filter filters the 4 CENELEC frequency bands (A Linky, B, C and D).
• Attenuation of -40 dB (99.99 % of signals are filtered)
• It filters PLC signals sent between phase and neutral. It therefore filters both phase and neutral. 
• Small footprint (only 4 modules on the panel)

Technical specifications :

• Filtered frequencies: 35 - 150 kHz
• Rated current: 10 (65)
• Maximum current: 65 A. Covers all subscriptions from 3 to 15 kVA single-phase.
• Certification - CENELEC standard: CE - EN 50065-1
• Operating voltage: 110-270 V
• Operating frequency: 50 - 60 Hz
• Protection rating: IP51
• Service life: 25 years @ 50°C
• Operating temperature: -25 +85 °C
• Max. phase/neutral connection cross-section: 6 - 16 mm².
• Tightening torque: 3 +-0.1 Nm
• Weight : 0.8 kg

Connection :

The PROSTOP65 filter is connected between the subscriber's circuit breaker and the electrical panel. It is therefore legally installed on the private part of the installation.

We recommend that you call in a professional for installation.

Single-phase connection         Three-phase connection

The PROSTOP65 filter has been certified by the ENAC/ECA certification body and complies with the following standards:  

• EN-50065-1 ; EN-60939-2   
• IEC-60950-1 ; IEC-62052-31 ; IEC-60950-1                 
• 2004/108/EC; 2011/65/UE
• UNE-20324 ; UNE-EN-50102 ; UNE-EN-61709
• UL-1283
• ROHS